ARMOUR PRODUCTS -- ARMOUR ETCH  -- 6850-00F006248
<pre>=====================  Product Identification  =====================

Product ID:ARMOUR ETCH
MSDS Date:01/01/1987
FSC:6850
NIIN:00F006248
=== Responsible Party ===
Company Name:ARMOUR PRODUCTS/MIDLAND, PARK, NJ 07432
Emergency Phone Num:(201) 652-8895
CAGE:ARMOU
=== Contractor Identification ===
Company Name:ARMOUR PRODUCTS/MIDLAND, PARK, NJ 07432
CAGE:ARMOU

=============  Composition/Information on Ingredients  =============

Ingred Name:HYDROGEN FLUORIDE  (SARA III)
CAS:7664-39-3
RTECS #:MW7875000
OSHA PEL:3 PPM/6 STEL (F)
ACGIH TLV:C 3 PPM (F); 9192
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:FLUORIDE COMPOUNDS, SOLUBLE
ACGIH TLV:3 PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:SEVERE SKIN/EYES IRRITATION. CORROSIVE TO SKIN.
    INHALATION CAUSES IRRITATION TO UPPER RESP TRACT.

=======================  First Aid Measures  =======================

First Aid:EYE/SKIN: FLUSH W/WATER FOR 15-30 MIN. CALL PHYS. SKIN: USE
    ALKALINE SOAP. IF SKIN IS IRRITATED IMMERSE IN 0.13% (1:750) ICED
    AQUEOUS ZEPHIRAN CHLORIDES SOLUTION FOR 30-60 MINS. INGESTION:
    DON'T INDUC E VOMITING. GIVE LARGE QTYS OF WATER. CALL PHYS.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER
Fire Fighting Procedures:NON FLAMMABLE
Unusual Fire/Explosion Hazard:HEATING MAY RELEASE TOXIC CORROSIVE
    GASES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NEUTRALIZE W/SODA ASH, CAUSTIC SODA OR LIME.
    WASH DOWN AREA W/PLENTY OF WATER. SPILLMAY BE REPORTABLE UNDER THE
    CLEAN WATER ACT. MATERIAL IS A HAZARDOUS WAS UNDER RCRA.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE NEAR CONCENTRATED BASES.

=============  Exposure Controls/Personal Protection  =============

Ventilation:LOCAL EXHAUST: IF STRONG FUMES ARE NOTICED
Protective Gloves:RUBBER/NEOPRENE
Eye Protection:PLASTIC GOGGLES
Other Protective Equipment:AS NEEDED TO PREVENT CONTACT W/SKIN OR
    CLOTHING.
Supplemental Safety and Health
MSDS DATE: 1/1/84

==================  Physical/Chemical Properties  ==================

Appearance and Odor:TAN CREAM, PUNGENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CONCENTRATED BASES
Stability Condition to Avoid:HEATING

====================  Disposal Considerations  ====================

Waste Disposal Methods:COMPLY WITH ALL LOCAL ENVIRONMENTAL REGULATIONS:
    DISPOSAL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.