ENCO PRINTING PRODUCTS -- SD-27, LITHOGRAPHIC PLATE PROCESSING SOL.  -- 3160-00F005031
<pre>=====================  Product Identification  =====================

Product ID:SD-27, LITHOGRAPHIC PLATE PROCESSING SOL.
MSDS Date:01/01/1987
FSC:3160
NIIN:00F005031
=== Responsible Party ===
Company Name:ENCO PRINTING PRODUCTS/SOMERVILLE, NJ 08876
Emergency Phone Num:(201) 231-2244
CAGE:ENCOP
=== Contractor Identification ===
Company Name:ENCO PRINTING PRODUCTS/SOMERVILLE, NJ 08876
CAGE:ENCOP

=============  Composition/Information on Ingredients  =============

Ingred Name:GLYCERIN
CAS:56-81-5
RTECS #:MA8050000
Fraction by Wt: 10%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 (MIST) 9293

Ingred Name:PROPYLENE GLYCOL MONOMETHYL ETHER
CAS:107-98-2
RTECS #:UB7700000
Fraction by Wt: 50%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192

Ingred Name:ETHYLENE GLYCOL  (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 1%
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Effects of Overexposure:IRRITATING TO EYES AND MUCOUS MEMBRANES.

=======================  First Aid Measures  =======================

First Aid:EYE CONTACT: WASH CONTINUOUSLY FOR 15 MINUTES WITH LARGE
    AMOUNTS OF WATER. CONSULT PHYSICIAN. SKIN CONTACT: WASH WITH SOAP
    AND WATER.

=====================  Fire Fighting Measures  =====================

Flash Point:122F (C.C.)
Extinguishing Media:WATER SPRAY, ALCOHOL FORM, CO2, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. FLUSH WITH
    WATER OR COLLECT USING ABSORBENT MATERL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN ORIGINAL CONTAINER. KEEP
    TIGHTLY CLOSED.
Other Precautions:STANDARD SAFETY PRECAUTIONS FOR CHEMICAL HANDLING
    SHOULD BE OBSERVED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE
Ventilation:LOCAL EXHAUST RECOMMENDED
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:SUITABLE CLOTHING TO AVOID SKIN CONTACT.
Supplemental Safety and Health
MSDS DATED: 01/31/85.

==================  Physical/Chemical Properties  ==================

Vapor Density:<AIR
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:98%

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:EXCESSIVE HEAT

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONFORM TO LOCAL REGULATIONS. CAN USUALLY BE
    DISCHARGED TO SEWER.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.